Page 9
Features
Default Setting
When the air conditioner restarts after a power
failure, it will default to the factory settings
(AUTO mode, AUTO fan, 24°C (76°F)). This
may cause inconsistencies on the remote
control and unit panel. Use your remote
control to update the status.
Louver Angle M emory Function
(some models)
Some models are designed with a louver angle
memory function. When the unit restarts after a
power failure, the angle of the horizontal louvers
will automatically return to the previous position.
The angle of the horizontal louver should not be
set too small as condensation may form and drip
into the machine. To reset the louver, press the
manual button, which will reset the horizontal
louver settings.
Auto-Restart (some models)
In case of power failure, the system will
immediately stop. To restart the unit, press the
ON/OFF button on the remote control. If the
system has an auto restart function, the unit will
restart using the same settings.
Unit
Specifications
and Featur
es
To further optimize the performance of your unit, do the follow ing:
•
Keep doors and windows closed.
Limit energy usage by using TIMER ON and TIMER OFF functions.
Do not block air inlets or outlets.
Regularly inspect and clean air filters.
•
•
•
NOTE:
Room relative humidity less than 80%. If the air conditioner operates in excess of this figure,
the surface of the air conditioner may attract condensation. Please sets the vertical air flow louver to
its maximum angle (vertically to the floor), and set HIGH fan mode.
