Install the Indoor Unit(Continue)
To take out the unit, pull the
marking at the bottom unit,and pull it
slightly towards you to disengage the
hooks from the unit.
Purifying filter installation (optional)
1. Open the grille.
2. Remove the air filters.
3. Put air purifying filter into place as shown in illustration.
Secure the Indoor Unit
1.Tape the extra connecting cable in a bundle and keep it behind the
chassis.Ensure that the connecting cable is not clamped in between
the unit's hook (2 positions) and installation plate.
2.Press the lower left and right side of the unit against the installation
plate until hooks engages with their slots (sound click).
marking
Attention not to bend
up drain hose
Rear view
Unit's
hook
Installation
plate
Insulation of piping connections
● Carry out insulation after checking
for gas leaks and secure with vinyl
tape.
Vinyl tape
Collaborate the piping
communication
wiring
Drain hose
Adjust the piping slightly downwards.
Air purifying filter
Air filter
1 Bend the pipe as
closely on the wall as
possible, but be careful
that it doesn’t break.
2 Do not wiring the
power wire and
communication wire
together.