Airwell AWAU-YMF007-H11, Руководство по обслуживанию

Страница: 41 / 72

ELECTRONIC FUNCTION
HMF Series 41 Version - 1
9.4.4 Auto-mode
This mode can be chosen with remote controller and the setting temperature can be changed
between 17~30
℃
.
In auto mode, the machine will choose cooling, heating or fan-
only mode according to ΔT (ΔT
=T1-Ts).
ΔT=T1-Ts
Running mode
ΔT
＞
2
℃
Cooling
-3
≤ΔT≤2
℃
Fan-only
ΔT<-3
℃
Heating(For cooling only models, they
will run at fan speed)
AC will run in auto mode in the below cases:
（
1
）
Pressing the forced auto button.
（
2
）
If AC is off, it will run in auto mode when the timer on function is active.
（
3
）
After setting the mode, AC will run in auto mode if the compressor keeps not running for
20 minutes.
9.4.5 Drying mode
8.4.5.1 The compressor is cycled running with 10 minutes on and then 5 minutes off. The indoor
fan will keep running at low speed.
8.4.5.2 In drying mode, if room temperature is lower than 10
℃
, the compressor will stop and not
resume until room temperature exceeds 13
℃
.
8.4.5.3 The evaporator anti-freezing protection is the same as that in cooling mode.
9.4.6 Forced operation function
Press the touch button continually, the AC will run as below sequence:
Forced auto
→Forced cooling →Off
Forced cooling mode:
The compressor and outdoor fan keep running and the indoor fan runs at low speed. After running
for 30 minutes, AC will turn to auto mode with 24
℃
setting temperature.
Forced auto mode:
The action of forced auto mode is the same as normal auto mode with 24
℃
setting temperature.

When AC receives signals, such as switch on, switch off, timer on, timer off, mode setting, fan
speed setting, sleeping mode setting, follow me setting, it will quit the forced operation.

The forced operation function can not be memorized if power off.
9.4.7 Timer function
8.4.7.1 Timing range is 24 hours.