Airwell AW-XDO009-H11, Руководство по установке

Страница: 9 / 24

9
1.11
A
B
C D
E
EN
INSTALLATION
To install the unit on a wall, drill 6 holes to attach the fixing
plate to the wall as indicated on the drilling template. The
appliance weighs more on the right, so make sure to secure
it properly on this side. The holes must have an 8 mm
diameter to accommodate the 6 supplied plugs.
A thorough examination of the characteristics and
consistency of the wall must always be carried out to
determine the number of fixing points to be made and to
choose specific plugs in particular conditions. In the case of
installation on a plasterboard or on walls with low density,
place a bracket, if necessary on the outside, that can support
the appliance safely.
The manufacturer cannot be held responsible for
any underestimation of the structural consistency of the
anchoring carried out by the installer.
We, therefore, encourage you to pay the utmost attention to
this operation as, if performed badly, it could cause serious
damage to people and objects.
To allow condensate drainage, drill a through hole in the
position indicated on the drilling template.
A hole is also indicated on the template to secure the
appliance on the wall with an anti-lifting bracket, which is
already on the appliance.
Holes for M8 plugs
Electrical connection area
Anti-lifting bracket hole
Assembling the unit
The console must be fixed in a horizontal position, use a spirit level