Airwell AW-XDO009-H11 Скачать руководство пользователя страница 5

5

1.3 

1.4 

EN

GENERAL

Description

The air conditioning unit XDO is the new solution that represents 
a significant step towards reducing the aesthetic impact of air 
conditioners. With a depth of just 16 centimetres, XDO is the most 
compact and least bulky of the category. The aesthetic impact is 
therefore minimal.

Optimised Capacities
The conditioning capacities of XDO have been optimised so as 
to obtain the right temperature for the best level of comfort and, 
therefore, less consumption and less noise.
Thanks to the careful choice of sound insulation materials, the 
noise is similar to that of a standard wall split unit and consumption 
is drastically contained thanks to the new direct current fan.

BLDC inverter technology
We have perfected the inverter technology to offer the best in 
terms of acoustic comfort (noise) and performance: reduction of 
consumptions, maintenance of the best temperature level and 
humidity level in the room.
Thanks to the use of the cutting edge BLDC (brushless direct current) 
inverter regulation, vibrations have been completely eliminated 
and acoustic emissions have been lowered to exceptional levels.
The fan motor is of the BLDC direct current type to further reduce 
energy consumption and to make flow regulation more accurate.
The energy consumption is extremely reduced thanks to absorption 
values falling down under 300 W in the case of partial load. At the 
nominal cooling power XDO, in the DC Inverter versions, has an 

EER more off 4.5, this is the cutting edge in the sector of monobloc 
climate control systems with fixed installation.

Easy to install
XDO can be installed on any wall, in a high or low position.
Everything that is required for installation (assembly template, 
support brackets), except for the drill of course, is contained in the 
packaging.

Remote control and on-board touch-screen display
In addition to the remote control, the touch-screen display on the 
unit enables the setting of any function. There's even a "lock" mode 
to avoid any improper use.
With a simple action on the touch screen display, the "heating" 
function can be deactivated: the appliance will then operate in 
"cooling" only.
The orientation of the air flaps, upwards or downwards, can also be 
set by simply pressing a key.

The packing is made of suitable material and carried out by 
expert personnel.
All units are checked and tested and are delivered complete 
and in perfect conditions, however please perform the 
following instructions to check the quality of shipping 
services:
-  upon receipt, check if the box is damaged. If that is 

the case, accept the goods with reservations and keep 
photographic evidence of any damage found

unpack and check the contents against the packing list.

-  check that none of the parts have been damaged 

during shipment. In case of damage, report it to the 
shipping company within 3 days of receipt by registered 
letter with return receipt and attaching photographic 
documentation. A copy should also be sent by fax to 

the MANUFACTURER.No notice of damage incurred will 
be accepted after 3 days from delivery.

 

  Keep the packing at least for the duration of the 

warranty period, in case you need to ship the air-conditioner 
to the service centre for repair.
Dispose of the packing materials in compliance with current 
regulations on waste disposal.

Storage

Store the box in a closed environment protected from 
atmospheric agents and isolate it from the floor usingplanks 
or pallets.

  Do not turn the carton upside down

 
 

Содержание AW-XDO009-H11

























Отзывы: