Airwell AW-XDO009-H11 Скачать руководство пользователя страница 4

4

1.1 

1.2 

General warnings

Fundamental safety rules

  After unpacking, check that the contents are intact and that 

all parts are included. If not, contact the agent who sold the 
appliance to you.

  The appliance must be installed by an authorised company. 

Once the work is done, it must issue a declaration of conformity 
to the client in compliance with current regulations and with 
the indications in the instruction manual supplied y the 
manufacturer with the appliance

  These appliances have been designed for conditioning and/

or heating rooms and they must be destined solely for this 
purpose, in accordance with their performance characteristics.

 

The manufacturer refuses any contractual or extra-contractual 
liability for damage caused to people, animals or property 
resulting from incorrect installation, adjustment, maintenance 
or improper use.

   

In the event of water leaks, turn off the main switch and 

close the water taps.

 

Immediately call the Technical Assistance Service or other 
qualified personnel and do not intervene personally on the 
appliance.

  A temperature that is too high or too low is harmful to health 

and is an unnecessary waste of energy.

 

Avoid prolonged direct contact with the air flow.

  Do not leave the room closed for long. Periodically open the 

windows to ensure proper ventilation.

  

This instruction booklet is an integral part of the 

appliance and, therefore, it must be kept with care and must 
ALWAYS accompany the appliance, even when the latter is 
transferred to another owner or user or transferred to another 
system.

 

If it gets damaged or lost, please request another copy from 
the local Technical Assistance Service.

  Repairs or maintenance must be performed by the Technical 

Assistance Service or by qualified personnel in accordance 
with this manual.

 

Do not modify or tamper with the appliance as this could 
create dangerous situations and the manufacturer will not be 
liable for any damage caused.

 

The appliance is declared to have an IPX0 protection rating, 
therefore, it cannot be installed outdoors or in laundry rooms.

  The use of products that use electricity and water requires the 

observation of some fundamental safety rules such as:

  The unit can be used by children over the age of 8, and by 

people with reduced physical, sensory or mental capabilities, 
or with no experience or necessary knowledge, as long as 
they are monitored or after they have received instructions 
on the safe use of the unit and have understood the dangers 
involved.

 

Children must not play with the appliance.

 

The cleaning and maintenance that must be performed by the 
user should not be carried out by children without supervision.

  It is forbidden to modify the safety or adjustment devices 

without authorisation from and indications of the 
manufacturer.

It is forbidden to pull, remove or twist the electric cables coming 

out of the unit, even when disconnected from the mains 
power supply.

  It is forbidden to introduce objects or substances through the 

aspiration grills and the air outflow.

  It is forbidden to open the access doors to the internal parts 

of the appliance without having turned off the main switch 
first or disconnecting the appliance from the electrical power 
supply.

  It is forbidden to dispose of, or leave in the reach of children, 

the packaging materials which could become a source of 
danger.

  It is forbidden to climb onto the appliance and/or to place any 

type of object on top of it.

GENERAL

Содержание AW-XDO009-H11

























Отзывы: