14
Airwallet PRO300
Installation Guide
Airwallet PRO to the payment port in your machine this
port is often called: 0.5 START, Coin 1, Price red, Start
Permitted, Start Pulse, SigProg, Coin Checker, Coin
Detector, or similar.
c. Connect the feedback signal from the Airwallet PRO to the
feedback port if you want to make the machine unavailable
for purchases in the period the machine is in use. The
feedback port or circuit is often called: Program run, Ende,
Program End Signal, Available Output, or similar.
2. When you have connected the Airwallet PRO to the
appropriate terminals you can power up the installation. If
the device does not appear in the Airwallet App check if the
device has been created on the Airwallet Dashboard.
Note:
If you need a specific wiring diagram for your machine, do not
hesitate to contact us at
