AirTouch ZoneTouch3, Руководство по установке

Страница: 12 / 28

12
Components Installation
Continued on next page
4.9 Fit the Console to wall
The plastic casing of the console consists of two halves. The front cover
contains the PCB board along with the LCD/console. The back cover attaches to
the wall as a mounting base. During the installation process the case will have to
be opened to mount the console on the wall. Follow the steps below to carefully
install the console to the wall:
a. Slide the back base to bottom side to clear the stops on the front cover
b. Remove the base from the front cover
c. Position the back base on the wall where the cable is (about 1.5m high from
the floor). Ensure it is away from any heat or cool source and mark the cable
hole and screw holes.
Note: The correct back cover direction is marked on its surface; follow that
mark when fixing the back cover.