12
On this screen you can choose the operation mode of your device as either an Access Point
or Router. Choose the operation mode of your device and click “
Save
”.
When you click “Internet” on the main menu of your device’s Web interface, the “Internet
(WAN) Status” page will come up. Here, you can see detailed information about your
Internet connection and upstream/ downstream data rates. You can also check the status of
your current PVC connection.
Connection Status
shows whether your device and the devices connected to it have
Internet access or not.
Link Type
shows the type of connection your device has to the Internet. Your device
connects to the Internet over Ethernet.
Link Mode
is the connection mode. It also indicates the maximum data rate for the
connection.
Internet Connection Speed shows the speed of upload and download traffic (in Kbps)
measured at every refresh.
3
ADVANCED
SETTINGS
3.1.
Operation Mode
3.2
Internet settings
3.2.1
Internet status
and statistics
When you click INTERNET on the main menu of the Web interface, you will see Internet
Settings as the first submenu. Go to Internet Settings to configure the Internet settings of
your device. If you are connected to the Internet through a direct connection to a cable
modem, then the information necessary for configuring the settings must be on your
computer. If you are a first time user, you can obtain the necessary information from your
Internet Service Provider.
1. When you click on the Internet Settings submenu, a table showing your default PVC
settings will be displayed.
3.2.2
Internet
Settings
2. To enter your Internet settings, click the “Edit” button in this table. The “
VLAN Settings
”
screen will come up.
3. First, you need to know which connection protocol your connection supports (PPPoE,
DHCP, Bridge or static).
4. Depending on the protocol you choose, your Internet provider must have given you the
necessary information to enter on this page. After you enter the necessary values, click
“
Save
”.
