Airtec Expert CYPRES 2, Руководство пользователя

Страница: 23 / 74

page 22 - CYPRES 2 User’s Guide -
ous harness/container systems. It was vital not to
impede the CYPRES unit’s primary function,
which is to cut the reserve closing loop. It was also
important to ensure that the initiation of the reserve
opening (by cutting the reserve closing loop) did
not hinder the reserve deployment in any way.
All CYPRES 2 installations should be performed
and approved by the harness/container manufac-
turer in collaboration with the AAD manufacturer.
If you want to install a CYPRES 2 into a container
that has not been set up for CYPRES 2 you should
contact the harness/container manufacturer for
advice. CYPRES 2 can be integrated into rigs
with existing setups. If in doubt, please contact
the harness/container manufacturer.
3. Installation
When the CYPRES AAD was introduced it was
necessary to establish a testing and evaluation
procedure for the installation of this new AAD
into existing harness/container systems, as no such
AAD concept ex-
isted on the market.
The installation had
to be tested and ap-
proved. This test-
ing was exclusively
performed at Airtec
GmbH & Co. KG in
Germany until 2012.
Airtec GmbH & Co.
KG took on this task
in preference to the
harness/container
manufacturers in or-
der to establish the optimal installation for each
system.
The variation in the resulting installation instruc-
tions was due to the different designs of the vari -
„Each parachute manufacturer
approves the installation of the AAD
on their equipment.“
12/04/13 AC No:105-2E Page 4 part 2.b.
of Advisory Circular of U.S. Department of Transportation, Federal
Aviation Administration
Retrofit: Comply with the specific retrofit instructions of
the harness/container manufacturers.