background image

 

 - CYPRES 2 User’s Guide -  

 page 21

 2.6.3.3 WSC Audio battery change 

1.  open the slide 

2.  gently insert a straightened paper clip* into 

hole A on the opposite side

3.  and slide the battery out.

4.  Insert the new battery (one CR2450).  

Respect  ± as shown on the slide.  

Please insert the new battery (+ pole up) with-

in half a minute after the old one is slid out.  

1

2

3

4

5.  Then execute a battery check. 

If you hear no sound, then slide the new battery out 

again right away because the new battery could be 

inserted upside down or the new battery could be 

empty. Correct the situation.
Our investigations found the Duracell CR2450 

batteries showed the best performance for power 

supply and temperature stability.

 2.6.3.4 WSC Audio battery check  

Only on the ground: Gently insert a straightened 

paper clip* into the „Bat Test“ 

hole as shown .When you pull 

it out you will hear the me-

lodic  sound  confirming  that 

the battery is o.k.

2.6.4 WSC Maintenance / Repair / Service 

The Audio and the cutter should be sent in together 

with the WSC unit.

* The SIM card opener of your mobile might do 

as well.

Содержание Expert CYPRES 2











































































Отзывы: