Airstream Classic Trailer 25' 2005, Руководство пользователя

Страница: 69 / 126

AIRSTREAM CLASSIC TRAILER
F-2
ULATOR
ll models are equipped with a two stage automatic change over gas regulator that offers the convenience
ull gas cylinders. Both tanks are connected to this regulator.
s propane in both tanks before you start. Rotate the black lever on the top front side of the
r closed. The indicator
AUTOMATIC GAS REG
A
of automatic changeover from empty to f
Make sure there i
regulator toward the cylinder you want to use first. This will be the “service” cylinder and the other will be
the “Reserve” cylinder. Slowly open both cylinders valves. Open both cylinder valves completely, then
close about 1/4 turn. This will allow you to easily check to see if valves are open o
on top of the regulator will turn bright green. The indicator will stay bright green as long as there is fuel
coming from the service cylinder. When the service cylinder empties, the regulator will draw fuel
automatically from the reserve cylinder providing an uninterrupted fuel flow to the system. When it
switches over, the indicator will change from green to red. This red color indicates the service cylinder is
empty and needs to be filled.
WARNING
: LP gas regulators must always be installed with the diaphragm vent facing
downward. Regulators that are not in compartments have been equipped with a protective cover
Make sure that regulator vent faces downward and that cover is kept in place to minimize vent
blockage, which could result in excessive gas pressure causing fire or explosion.
.
WARNING
: The vent at the bottom of the regulator must be kept free of any obstructions
lever all the way over towards the reserve (full) cylinder.
nder becomes the service cylinder. Next, shut off the valve
ntil the hold down bracket is loose enough to
bottle cover the "T"' handle must be removed, and
and must be pointed downward. A good habit is to check the vent each time a bottle is removed for
filling. It is especially important to check the vent if the trailer has not been used regularly.
LPG BOTTLES
The following step-by-step procedure gives you the proper method of removing and installing these bottles:
To Remove
1. To remove the empty cylinder, rotate the black
The indicator will turn green and the reserve cyli
on the empty cylinder.
2. Turn the large clamping "T"' handle counterclockwise u
remove the bottle. If your trailer is equipped with a gas
then remove the cover before removing the bottle.
. Now, disconnect the cylinder supply hose, and have the cylinder refilled. 3
CAUTION
: The LPG bottles are securely mounted on the front "A" frame of your trailer. If these
bottles must be removed for service or replacement it is important that they be reinstalled correctly
order to prevent any possibility of their falling off or becoming dislodged during in travel.
WARNING:
DO NOT REMOVE THE CENTER HOLD DOWN ROD THAT THE “T”
ANDLE IS TREADED ON. H