Airstream Classic Trailer 25' 2005, Руководство пользователя

Страница: 45 / 126

AIRSTREAM CLASSIC TRAILER
D-3
Chassis
The standard RECOMMENDED HITCH BALL HEIGHT for your Airstream is 18 ¾” on all models
except the slide outs which are 19.75”. If you plan long trips with the trailer heavily loaded you should
check your trailer, after loading, to determine the optimum height. To check, park the trailer on a level
surface and crank the front jack up or down until the measurement from the frame to the ground is the same
front and rear. Measure from the ground to the upper surface of the hitch ball coupler. Add one inch to this
figure when setting the ball height on the tow vehicle to allow for the suspension settling under the added
weight.
WARNING
- ALWAYS OPEN LATCH HANDLE BEFORE INSERTING BALL
OPERATION INSTRUCTIONS
1. To open - slide forward and pull up to open latch before
inserting ball.
2. Place coupler on ball of same diameter as coupler and of same
or greater capacity.
3. When ball is completely nested in socket, push top of latch
handle rearward until handle snaps into closed position. (Figure 2)
4. Extend jack to ground and lift car/trailer combination 2-4" to
insure coupler is securely attached to tow ball. Retract jack before
towing.
5. Insert padlock through hole in handle for theft prevention.