Airstream 2009 Pan America, Руководство пользователя

Страница: 102 / 135

F - 12 F - 13
PLUMBINg
F
insert the brass hose fitting into the valve. Slide the collar forward to complete
connection.
To use system check that the inline water supply valves located inside the
lavatory cabinet are on then use water pump system or city water supply to
feed the shower.
Maintenance
A. Your Hot & Cold Spray-Port should be drained for transport or if freezing
weather is expected.
To drain:
1. Turn off the inline water supply valves located inside the lavatory cabinet or
shut off the water pump or disconnect the city water feed.
2. Open hot and cold valves.
3. Remove the sprayer nozzle from the coiled hose and insert the hose into the
brass quick connect. This will release the quick connect valve stopper.
4. Hold the open end of the hose near to the ground and drain the system.
To winterize the Hot & Cold Spray-Port system only and continue to use the
rest of the water system in freezing weather:
1. Shut off the water pump or disconnect the city water feed.
2. Open hot and cold valves.
3. Turn the inline water supply valves located inside the lavatory cabinet on.
4. Open the low point water line drain valves located on the tan pan under the
trailer for 5 minutes allowing water to drain from the water supply lines to the
shower.
5. Remove the sprayer nozzle from the coiled hose and insert the hose into the
brass quick connect while low point drain valves are open.
6. Close the inline water supply valves located inside the lavatory cabinet on.
7. Close the low point drain valves and reconnect the city water supply or turn
the water pump back on.
For instruction on winterizing complete trailer see Winterizing Section in this
manual.