Airsight 62A Series Скачать руководство пользователя страница 58 | Manualshive

Страница: 58 / 58

background image

58

6. OBTAINING TECHNICAL SUPPORT

We hope your experience with your IP network camera is enjoyable, but if you experience any issues or have any questions
that this User's Guide has not answered, please visit www.x10.com/support, or e-mail [email protected]. If your camera does
not support some special functions shown in this manual, please contact our technical support team to obtain the latest
Firmware and WEB UI file for upgrading.

FCC Caution

THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:
(1)   THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND
(2)  THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE

UNDESIRED OPERATION.

This equipment generates and uses radio frequency energy, and if not installed and used properly, that is, in strict accordance
with the manufacturer’s instructions, it may cause interference to radio and television reception. It has been type tested and
found to comply with the limits for remote control devices in accordance with the specifications in Sub-Parts B and C of Part 15
of FCC Rules, which are designed to provide reasonable protection against such interference in a residential installation.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
interference to radio or television reception, which can be determined by unplugging the equipment, try to correct the
interference by one or more of the following measures.

• Reorient the antenna of the radio/TV experiencing the interference.
• Relocate the equipment with respect to the radio/TV.
• Move the equipment away from the radio/TV.
• Plug the equipment into an outlet on a different electrical circuit from the radio/TV experiencing the interference.
• If necessary, consult your local dealer for additional suggestions.

NOTE:

Modifications to this product will void the user’s authority to operate this equipment.

X10 AIRSIGHT 90 Day Limited Warranty

X10.com, a division of Authinx Inc., warrants this product to be free from defective material and workmanship for a period of
90 days from the original date of purchase at retail. X10 agrees to repair or replace, at its sole discretion, a defective product
if returned to X10 within the warranty period and with proof of purchase. If service is required under this warranty:

Call 1-888-384-0969, visit www.x10.com, or email [email protected]

«
...
56
57
58

Содержание 62A Series



























































Отзывы:

Нет отзывов

Похожие инструкции для 62A Series

Бренд: Samsung Страницы: 200

Бренд: Caddx-Caddi Controls Страницы: 6

Бренд: Sanlien Страницы: 42

Бренд: Velleman Страницы: 20

Бренд: Digisol Страницы: 18

Бренд: Pasco Scientific Страницы: 6

Бренд: ABLE Страницы: 55

Magnum Alert-900

Бренд: NAPCO Страницы: 76

Бренд: Salray Works Страницы: 69

Бренд: 3xLogic Страницы: 23

Бренд: Conbrov Страницы: 10

Dual-Lite PGR LED Sconce

Бренд: Hubbell Страницы: 2

Бренд: Hanwha Vision Страницы: 10

Care@Home ES700IPD

Бренд: Essence Smartcare Страницы: 35

Бренд: M-system Страницы: 6

C730IP 10.028.16

Бренд: Smartwares Страницы: 29

Бренд: NED Страницы: 72

Бренд: Kennell Страницы: 40

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды