Page 3 of 3
Set up:
1. This inflatable is intended to be used on soft floor and if you are inflating on a hard ground
we recommend protective matting to be used under the inflatable. In this case lay out mats
so that there are no gaps between them.
2. Unroll and lay out the
‘Playzone’ onto the mats making sure that every part of the
‘Playzone’ is contact with the mats, please observe how the ‘Playzone’ has been rolled as
reverse will need to be done after Take Down.
3. Position the fan and attach to the inlet tube and fasten, make sure that other inlet tubes are
tied off.
4. Children should not be allowed to come in contact with the fan so this area should be
cordoned off.
5. Switch on the fan and inflate.
Important:
The slide has safety mats to cushion the landing. When you set up your unit it is
imperative to position the safety mats on both ends of the slide
– see image below:
The ball pond also has a safety mat
–please note the mat needs to be in its place at
all time. When in use the ball pond needs to be filled with balls.
