AirPro 785247264445, Руководство по установке

Страница: 12 / 30

Fob
Reverse
switch
9.
Assembling the Fan
without the Light Kit
1. In order to use the fan without the light kit,
remove the switch housing from the top of light
kit fitter assembly by removing the center hex
nut inside the switch housing, and then thread the
switch housing cover off the threaded nipple on
the top of the light kit fitter assembly (figure 17).
2. Press the plastic plug (provided) into the center
hole of the switch housing (figure 18).
3. Remove and retain the three mounting screws
from the switch housing cover of the light kit
fitter assembly (Figure 13).
4. Position the switch housing cover onto the switch
housing and reinstall the light kit mounting
screws (figure 19).
5. Install the pull chain extension chain and fob
(Figure 20).
Figure 19
Figure 20
Switch housing
Switch housing
cover
Plug
Figure 17
Figure 18
Switch housing
cover
Hex nut
Switch housing
cover
Plug