AirPicnic APN212, Руководство пользователя

Страница: 6 / 29

PANEL CONTROL
CAUTIONS:
If the unit is turned off in cool /dry/ heat mode and restarted
immediately , then it will wait at least 3minutes before running again.
1. Buttons
Timer: press this button to set the timer
Swing: press this button to make the vertical louver swing automatically.
Press once again, the swing will stop.
Speed: press this button for 5 seconds to select high, middle or low fan
Speed.
Up/down: press up or down button to set temperature or adjust the time in
Timer mode. Press both buttons to vary from Celsius to Fahrenheit.
Mode: press this button to select cool, heat, dry or fan mode (heat mode
only in YPC-H models).
Econ: press this button to a set energy saving mode (only in heat and cool
mode). This set temperature is 27
℃
in cool mode and 23
℃
in heat
mode . The fan speed is low. These data can’t be changed. The LED
display will flash or accordingly. Press again to cancel it when
or is flashing.
Power: press this button to turn on/off the unit.
2. LED display
Timer indicator
Dry, cool, fan and heat mode indicator (no in cooling only
model)
High, middle and low fan speed indicator
Water Full indicator
Water Injection indicator
IR receiver window
Indicate the time and temperature. Display EX (X=2,3) when
there is something wrong (refer to Self diagnosis function).
Display E4 when coil is defrosted.
5