AirPicnic APN212, Руководство пользователя

Страница: 12 / 29

* When the water in the cave is not enough for pumping, the pump will stop
working. At the same time, the Water Injection indicator on the control panel
will illuminate (
), you had better inject some water into the water draw
carefully. In order to avoid the water flooding from the under pan, you should
inject water no more than 1800ml (three cups). This operation helps save
20%-30% energy for you.
MAINTENANCE
Cleaning
Turn off the unit and pull the plug out of the socket before any cleaning.
1.Clean the surface
Clean the surface of the unit with a duster or a half-wet soft cloth.
Do not use chemical solvent like benzene, alcohol, gasoline and etc,
Or the surface may be damaged or even deformed.
2. Clean the air filter
If the air filter is blocked with a lot of
dust, the efficiency will reduce. You’d
better clean the filter every two weeks.
1) Pull out the air filter as Fig.14.
2) Wash the air filter by immersing
it gently into warm(under 40
°
C or 104
°
F)water with neutral detergent. Rinse
the filter and dry it in a shaded place.
3) Push the air filter back into the
original position.
End of season
1.Pull out the plug from the drain mouth and remove the water from the drain
pan. You can remove the water entirely by slanting the unit back.
Setting the fan mode, then press the Fan button for 5 seconds until the lower
fan works. After that, operate the unit in fan mode for half a day until the pipe is
1 1