Use and maintenance manual Self-propelled aerial platforms Page 7
1.4
Control stations
The machine is equipped with two control stations:
-
at platform for normal use of the unit;
-
on-chassis (or ground) for emergency controls to lower or stop the unit in emergency situations. The on-ground control
post is also equipped with a key-selector to select the control post and to start the unit.
1.5
Power supply
The machines can be powered by:
-
an electric-hydraulic system composed of rechargeable accumulators and electric pump (models “-E”);
-
a heat engine (Diesel engine models are identified by the abbreviation “-D”; petrol engine models are identified by the
abbreviation “-B”);
-
a bi-fuel electric/thermic system (bi-fuel Electric/Diesel models are identified by the abbreviation “E/D”; bi-fuel
Electric/Petrol models are identified by the abbreviation “E/B”).
In any case both the hydraulic and the electric systems are equipped with all necessary protections (see electric and hydraulic
circuit diagrams annexed to this manual).
Do not use the machine for purposes different from those it was intended for.
If disposal of the unit is necessary, comply with current local regulations.
