Power Cord
*Shown with optional mooring kit
Cord Strain
Relief Attachment
Carabiner
Mooring Line
(Vinyl Coated Galvanized Wire)
PondSeries
™
Fountain
Control
Panel
Mooring Stake
Installing the PondSeries
™
Fountain
A. System Components:
1.
Fountain Pump with Quick Disconnect, Float Mount Ring and
Classic Spray Pattern (installed)
2.
Fountain Float
3.
Power Cord
4.
Control Panel
5.
Crown & Trumpet Spray Pattern (interchangeable)
6.
Trumpet Spray Pattern (interchangeable)
B. Prepping the PondSeries for Installation:
1)
Ensure you have power close to your pond. If you don’t, we recommend to ALWAYS use a
licensed electrician to properly run power down to the pond.
2)
Mount the Control Panel in a fixed position next to the power source. (For control panel
installation and wiring instructions for your fountain and light set, please see control panel
manual for details.)
a)
If you are unable to perform installation of your control panel or light set please contact
your Certified Airmax Service Technician and they can perform this installation for you.
3)
Choose Your Spray Pattern (Fig. 3)
a)
The PondSeries automatically creates the classic pattern without a nozzle installed;
however, the PondSeries includes two additional spray patterns
(Trumpet and Crown & Trumpet).
b)
To change a pattern, simply unscrew the nozzle nut, replace the pattern and reinstall the
nozzle nut. We recommend removing the nozzle nut while displaying the classic pattern.
4)
Assembling the Unit (Fig. 4)
a)
Lay the float flat on the ground with Airmax logo facing up.
b)
Place the fountain pump assembly into the center of the float.
c)
Lift the float straight up and ensure that the fountain pump lead power cord passes
through the center hole. Gently lay the fountain to one side.
d)
Securely attach the power cord to the fountain pump lead quick disconnect.
e)
Attach the power cord strain relief to the loop underneath the float mount ring. (Fig. 2)
f)
Attach a mooring cable (not included) using two outside mounting locations on opposite
sides of the fountain float (Fig. 2).
3. Setup & Installation
Classic
Trumpet
Crown & Trumpet
Fig. 3
Fig. 4
Unscrew Nozzle Nut to
change Patterns
Mooring Kit Options:
#651052 –
150’ Mooring Kit
#651054 –
250’ Mooring Kit
#651055 –
500’ Mooring Kit
* Mooring Kit Not Included with Fountain
ENGLISH
• 2 stakes
• 2 carabiners
• 2 cable clamps
• 150’, 250’ or 500’ black vinyl
coated galvanized cable
(Mooring Line)
Recommended Mooring Kit
Fig. 1
Fig. 2
Strain Relief
Mooring Kit
4
