AirMan SDG100S-8B1, Инструкция по эксплуатации

Страница: 59 / 75

6. Maintenance/Adjustment
6
-
5
6.2.1 Engine trouble
This unit is equipped with a device of controller
which memorizes contents of engine trouble.
When engine fails, trouble diagnosis lamp “1”
goes on. For the details of the trouble, press
trouble diagnosis switch “2” and then it displays
the conditions of the failure, lamp blinking.
<
Procedures
>
①
Turning starter switch to “RUN” position, keep
pressing trouble diagnosis switch “2”.
②
In case that any trouble is found while it is kept
pressing, trouble diagnosis lamp “1” displays the
details of the failure by lamp lighting.
To solve or repair failures, special knowledge is
required. Contact your nearest distributor or
directly us.
[
Example of diagnosis lamp lighting
]
Long interval lighting 2 times short interval lighting 3 times : This code shows
「
23
」
Short interval lighting 4 times long interval lighting one time and short interval
Lighting 3 times : This code shows 「 413 」
(1) (2)
(1) (2) (3)
(1) (2) (3) (4)
Long interval lighting : about 1.2 seconds Short interval lighting: about 0.3 seconds
＊ There are more than 10 lighting patterns of failures. So for the details, please ask us or your
distributor.
(1) (2) (3) (1)
Long interval lighting
(Flashing)
In case of code 「 23 」
In case of code
「
413
」
Lighting “ON”
Lighting “OFF”
Lighting “ON”
Lighting “OFF”
Short interval lighting
(Sparkling)
Long interval lighting
(Flashing)
Short interval lighting
(Sparkling)
Short interval lighting
(Sparkling)
Long interval lighting
(Flashing)
1
2
A090120
Discount-Equipment.com