AirMan SDG100S-8B1, Инструкция по эксплуатации

Страница: 54 / 75

5. Periodic Inspection/Maintenance
5
-
13
A070335
5.5.16 Change Air Filter Element
[Every 1,000 hours]
When an element that is clogged or has holes or cracks is used, dust or foreign material will get in the
engine. This causes accelerated wear in each sliding part of the engine. Be sure to make daily check
and cleaning so that the life of the engine will not be shortened
.
If the warning lamp for air filter clogging glows, remove
the element
“
1
”
and replace it after inspection.
(See 5.4)
In case you attach the cup
“
2
”
after element change, please
push into a case
“
3
”
firmly by hand, and fasten after
checking having applied the hook of the handle for cup
fixation to the case
“
3
”
.
5.5.17 Check Rubber hose
[Every 1,000 hours]
When any crack or wear is found on the hoses, change it even before the scheduled time.
Ask your nearest dealer for its replacement.
5.5.18 Clean and Change filter inside the fuel air bleeding electromagnetic pump
[Every 1,000 hours]
<Procedure>
Remove the cap
“
1
”
by turning it counterclockwise. Then
replace the filter
“
2
”
provided in it. (See 5.4)
When doing this replacement, the fuel inside the filter
can flow out. So place a fuel receiver under the filter
beforehand.
Be sure to properly clean air filter element
A070311
2
1
3
2
1
Discount-Equipment.com