manualshive.com logo in svg

AirMan SDG100S-8B1, Инструкция по эксплуатации

Поделиться
Скачать
AirMan SDG100S-8B1 Скачать руководство пользователя страница 3

Preface 

 

A040491

Thank you for having selected our “AIRMAN” product.

 

◆ 

This manual explains about the proper operation and daily inspection and maintenance of this 
machine. 

◆ 

In order to use a machine safely, people with sufficient knowledge and sufficient technology need to 
deal with it. 

◆ 

Before operating the unit, read the manual carefully, fully understand its operation and 
maintenance requirement. Maintain

 “SAFETY OPERATION AND PROPER MAINTENANCE OF 

THE UNIT”

.

 

Be sure to follow safety warnings and cautions given in the manual. 
Unsafe operation could cause serious injury or death. 

 

◆

 

For details of handling, maintenance and safety of the engine, see the Engine Operation Manual. 

 

◆

  Keep the manual available at all times for the operator or safety supervisor. 

 

◆ 

If the manual is lost or damaged, place an order with your dealer for another copy. 

 

◆ 

Be sure that the manual is included with the unit when it is handed over to another user. 

 

◆ 

There may be some inconsistency in detail between the manual and the actual machine due to 
improvements of the machine. Ask your dealer if you have any questions or problems. 

 

◆ 

If you have any questions about the unit, please inform us the model and serial number. A plate 
stamped with the model and serial number is attached to side of the unit. 

 
 
 
 
 
 
 
 

◆ 

Each illustrated figure (Fig.) has a number of 7 
digits (for instance, A040491) at the right 
bottom. This number is not a part number, but 
it is used only for our reference number. 

 

Discount-Equipment.com

Содержание SDG100S-8B1












































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды