AirMan PDSE900S-4B1, Инструкция по эксплуатации

Страница: 40 / 67

5. Periodic Inspection/Maintenance
5
-
3
5.4 Periodic Inspection List
(Unit:Hour)
Maintenance
Daily
250 300 500 1,000 2,000 3,000 6,000 12,000 Page
Check compressor oil level.
○
4-8
Drain separator receiver tank.
○
4-8
Check looseness in pipe connecting part, and
wear and tear of pipe.
○
4-11
Check oil, water, fuel and air leak.
○
4-14
Check performance of gauge and indication
lamps.
○
4-14
Performance Check of Safety Valve.
○
4-15
Change compressor oil. ※○
○
5-8
Change compressor oil filter.
※○
○
5-9
Clean strainer in the scavenging orifice.
○
5-10
Clean and change air filter element.
○
○
5-7
Clean outside of the oil cooler.
○
5-12
Supply grease to trailer spring pin
○
5-13
Change pressure regulator diaphragm. ☆●
Change oil separator.
●
5-15
Change nylon tubes. ☆●
Change rubber hoses. ★●
O-ring change of a piping terminal area ★●
Check diaphragm of auto-relief valve.
★●
Check o-ring of auto-relief valve. ★●
Clean butterfly valve (unloader)
●
Change diaphragm of vacuum-relief valve
★●
Change o-ring of vacuum-relief valve
●
Change o-ring of pressure control valve
●
Change rubber coupling.
●
Com
pres
so
r
Change oil seal/bearing
●
Such items marked
○
shall be carried out by customers.
For the following items or clauses marked
●
, contact us directly or our distributors because they require
expert technical knowledge on them.
The following table shows the inspection and maintenance intervals under normal operation
conditions. In case the unit is operated under harsh environmental conditions and operation
conditions, the intervals should be shortened.
The items or parts marked
※
1 show that they should be replaced primarily.
The items or parts marked
☆
should be replaced every two years even if they are not in disorder within their
periodical maintenance interval because their materials will change or become degraded as time passes.
Also for the same reason, the parts marked
★
should be replaced every three years.
Clean
Change