4. Quick Start
27
AirLive WT-2000ARM User’s Manual
Static IP Address
Parameter
Description
Encapsulation
Please check with your ISP the method of multiplexing. In Bridge
Mode, please select “1483 Bridge IP LLC” or “1483 Bridge IP
VC-Mux”.
Static IP Address
Enter the IP Address assigned by your ISP.
IP Subnet Mask
Enter the Subnet Mask assigned by your ISP.
Gateway
Enter the Gateway assigned by your ISP.
NAT
NAT (Network Address Translation), an Internet standard that
enables a local-area network (LAN) to use one set of IP addresses
for internal traffic and a second set of addresses for external
traffic. When NAT is enabled, the router will help to make all
necessary IP address translations for the PC connected to the
router to access the Internet.
Default Route
When “Default Router” is enabled, all the packets for destinations
not known by the router's routing table are sent to the default
route. By default, it is enabled.
TCP MTU Option
MTU (Maximum Transmission Unit) determine the maximum size
of each packet in any transmission within the network. Please
specify the MTU range from 100 to 1500 bytes or 0 byte as the
default value.
Dynamic Route
Dynamic routing allows routing tables in routers to change as the
possible routes change. This router supports RIP1, RIP2-B and
RIP2-M protocols for dynamic routing. After the RIP protocol is
selected, please choose the RIP direction from “None”, “Both”, “IN
Only” or “OUT Only”.
Multicast
Specify the method of transmitting data simultaneously to many
