AirLive WN-300R Скачать руководство пользователя

Страница: 7 / 110

Chapter 1 : Introduction

This Chapter provides an overview of the Wireless Router's features and
capabilities.

Congratulations on the purchase of your new Wireless Router. The Wireless Router is
a multi-function device providing the following services:

•

Shared Broadband Internet Access

for all LAN users.

•

Wireless Access Point

for 802.11b, 802.11g and 802.11n Wireless Stations.

•

4-Port Switching Hub

for 10BaseT or 100BaseT connections

Figure 1: Wireless Router

1.1 Wireless Router Features

The Wireless Router incorporates many advanced features, carefully designed to provide
sophisticated functions while being easy to use.

Internet Access Features

•

Shared Internet Access.

All users on the LAN or WLAN can access the Internet

through the Wireless Router, using only a single external IP Address. The local
(invalid) IP Addresses are hidden from external sources. This process is called
NAT (Network Address Translation).

•

DSL & Cable Modem Support.

The Wireless Router has a 10/100BaseT

Ethernet port for connecting a DSL or Cable Modem. All popular DSL and Cable
Modems are supported.

•

PPPoE, PPTP and L2TP Support.

The Internet (WAN port) connection supports

PPPoE (PPP over Ethernet), PPTP (Peer-to-Peer Tunneling Protocol) and L2TP,
as well as "Direct Connection" type services.

•

Fixed or Dynamic IP Address.

On the Internet (WAN port) connection, the

Wireless Router supports both Dynamic IP Address (IP Address is allocated on
connection) and Fixed IP Address.

AirLive WN-300R User’s Manual

Содержание WN-300R















































































































Результаты поиска

Содержание WN-300R

Отзывы:

Похожие инструкции для WN-300R

Бренды по названию

Популярные бренды

AirLive WN-300R, Руководство пользователя

Результаты поиска

Содержание WN-300R

Отзывы:

Похожие инструкции для WN-300R

Бренды по названию

Популярные бренды