- 9 -
C
HAPTER
2
Surveillance Solution
W
IRELESS
C
ONNECTION
2.1 Using WPS Button
Make sure your AP (Access Point) and Operation System
support WPS (Access Protected Setup) functions WPS
enables easy setup with compatible Aps.
Disconnect your LAN cable, and wait for the LED to turn red.
Press the WPS button for 1 second.
Press and hold down the WPS button on your AP (some
router/AP will have a virtual button on their management
software instead). Refer to your AP's documentation for
details using its WPS functions.
When WPS configuration is done, wireless connectivity will be
established and the security encryption, such as WEP or WPA-
PSK, will be synchronized with the AP.
As for IP setting, the camera's use of DHCP or static IP is
determined by your configuration on the network camera via the
web based configuration of firmware. The camera's default is
DHCP.
Содержание SmartCube 300W
Страница 1: ......
Страница 43: ... 42 4 6 3 Status Network ...
Страница 55: ... 54 ...
Страница 68: ......