- 24 -
- DHCP IPv4/IPv6: DHCP for IPv6 enables the DHCP
server to pass the configuration parameters (e.g. the IPv6
network addressed) to the IPv6 nodes, which offers the
capability of automatic allocation of reusable network
addresses and additional configuration flexibility. Select
this option if your network supports DHCP IPv6 protocol.
When the camera starts up, it will be assigned an IP
address from the DHCP server automatically.
- Static IPv4/IPv6: Select this option to assign the IP
address for the camera directly. You can use IPFinder to
obtain the related setting values.
IP Address
(IPv4/IPv6)
Enter the IP address of the camera. The
default setting is
192.168.1.99
.
Subnet Mask
Enter the Subnet Mask of the camera. The
default setting is
255.255.255.0
.
Default
Gateway
Enter the Default Gateway of the camera.
The default setting is
192.168.1.254
.
Primary/
Secondary
DNS
DNS (Domain Name System) translates
domain names into IP addresses. Enter the
Primary DNS and Secondary DNS that are
provided by ISP.
HTTP Port
The default HTTP port is 80.
RTSP Port
The default RTSP Port (Real Time
Streaming Protocol) is 554.
RTP Data Port
RTP (Real-time Transport Protocol) is a data
transfer protocol defined to deliver live
media to the clients at the same time, which
defines the transmission of video and audio
files in real time for Internet applications.
The default RTP Data Port is 5556.
Enable Multicast: Select this option to enable the multicast
function of the camera, and then complete the following
settings so that you can deliver information from your camera
to a set of receivers.
Содержание SmartCube 300W
Страница 1: ......
Страница 43: ... 42 4 6 3 Status Network ...
Страница 55: ... 54 ...
Страница 68: ......