AirLive SmartCube 300W, Руководство по продвинутой установке

Страница: 26 / 68

- 25 -
- Multicast Group Address: Assign a category of IP
addresses to receive the information from the camera.
- Multicast Video Port: Assign a multicast port for video in
the text box. The default port is 5560.
- Multicast RTCP Video Port: Assign a multicast port for
RTCP (real-time transport control protocol) video in the
text box. The default port is 5561.
- Multicast Audio Port: Assign a multicast port for audio in
the text box. The default port is 5562.
- Multicast RTCP Audio Port: Assign a multicast port for
RTCP (real-time transport control protocol) audio in the
text box. The default port is 5563.
- Multicast TTL: Set the value from 1 to 255. TTL (time to
live) is used to specify the time to live in the IP header so
that the system is able to decide whether or not the packet
has been in the network too long and should be discarded.
Enable PPPoE: Select this option when you use a direct
connection via the ADSL modem. You should have a PPPoE
account from your Internet service provider. Enter the User
Name and Password. The camera will get an IP address
from the ISP as starting up.
NOTE Once the camera get an IP address from the ISP as starting up,
it automatically sends a notification email to you. Therefore,
when you select PPPoE as your connecting type, you have to
set up the email or DDNS configuration in advance.
Enable DDNS: Select this option to enable DDNS service of
the camera. With the Dynamic DNS feature, you can assign
a fixed host and domain name to a dynamic Internet IP
address. To set up the DDNS, select the Provider from the
pull-down menu and then enter the required information in
the Host Name, User Name, and Password text boxes.
NOTE You have to sign up for DDNS service with the service provider
before configuring this feature.