manualshive.com logo in svg

AirLive RS-3000, Руководство пользователя

Поделиться
Скачать
AirLive RS-3000 Скачать руководство пользователя страница 216

 

19.2 Signature 

 

The RS-3000 can provide the correspond comparison rules included 

Anomaly

, 

Pre-defined 

and 

Custom 

according to different attack types. 

 

The 

Anomaly 

can detect and prevent the anomaly flow and packets via the signature updating. The 

Pre-defined 

can also detect and prevent the intrusion through the signature updating. Both the 

anomaly and pre-defined signatures can not be deleted or modified. The 

Custom 

can detect the other 

internet attacks, anomaly flow packets except the original 

Anomaly 

and 

Pre-defined 

detection 

according to the user demand. 

 

Anomaly: 

 

It includes the syn flood, udp flood, icmp flood, syn fin, tcp no flag, fin no ack, tcp land, larg icmp, 

ip record route, ip strict src record route, ip loose src record route, invalid url, winnuke, bad ip 

protocol, portscan and http inspect, such Anomaly detection signatures. (Figure 19-2)

 

 

User can enable the anomaly packets signature to detect, depends on the user demand. 

 

User can manage the specific anomaly flow packets.

 

 

User can modify the action of pass, drop and log.

 

 

The RS-3000 can display all the anomaly detection signature attribute of Name, Enable, Risk, 

Action, and Log.

 

 

Figure19-2

 

The anomaly signature setting 

 

214

Содержание RS-3000

















































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды