6.4.5 IP Notification
When network notify type is set to On, you can send an e-mail notification of the completion of the network
setting.
z
Notify type
：
Select type of DHCP, Static IP and PPPoE will notify.
z
SMTP server name
：
Type the SMTP server name up to 64 characters, or the IP address of the SMTP
server.
z
Authentication
：
Select the authentication required when you send an email.
z
Off:
Select if no authentication is necessary when an email is sent.
z
On:
When authentication is necessary an e-mail is sent, select one of the authentication methods from the
followings.
z
SMTP:
Select if SMTP authentication is necessary when an e-mail is sent.
z
POP before SMTP:
Select if POP before SMTP authentication is necessary when an e-mail is sent.
Note
：
• When you set to
On
, be sure to select either or both
SMTP
or/and
POP before SMTP
.
z
POP server name
：
It is necessary when the
POP before SMTP
is selected in
Authentication
. Type the
POP (receiving mail) server name up to 64 characters, or type the IP address of the POP server. This
setting is necessary when the SMTP server which sends e-mails performs authentication using the POP
user account.
z
User name, Password
：
Type the user name and Password of the user who has the mail account. This
setting is necessary when the SMTP server which sends e-mails performs authentication.
z
Recipient e-mail address
：
Type the recipient e-Mail address up to 64 characters. You can specify up to
three recipient E-mail addresses.
z
Administrator e-mail address
：
Type the Administrator e-Mail address up to 64 characters.
This address
is
used for reply mail and sending system messages from the SMTP server.
z
Subject
：
Type the subject/title of the e-Mail up to 64 characters. With respect to mail which is sent
22
AirLive POE-100CAM User’s Manual
