AirLive IP-2000VPN, Руководство пользователя

Страница: 63 / 177

2. Click
Next
to continue. You will see a screen like the following:
•
For outgoing VPN connections, these settings determine which traffic will cause a VPN tunnel to be
created, and which traffic will be sent through the tunnel.
•
For incoming VPN connections, these settings determine which systems on your local LAN will be
available to the remote endpoint.
•
The 2 VPN endpoints MUST use different address ranges.
If the addresses were in the same range, traffic intended for the remote VPN would be considered
local LAN traffic. So it would not be forwarded to the Gateway.
Local IP addresses
Type
•
Any
- no additional data is required. Any IP address is acceptable.
•
For outgoing connections, this allows any PC on LAN to use the VPN tunnel.
•
For incoming connections, this allows any PC using the remote endpoint to
access any PC on your LAN.
•
Single address
- enter an IP address in the "Start IP address" field.
•
Range address
- enter the starting IP address in the "Start IP address" field, and
the finish IP address in the "Finish IP address" field.
•
Subnet address
- enter the desired IP address in the "Start IP address" field,
and the network mask in the "Subnet Mask" field.
The remote VPN must have these IP addresses entered as its "Remote" addresses.
AirLive IP-2000VPN User’s Manual 60