AirLive IP-2000VPN, Руководство пользователя

Страница: 16 / 177

AirLive IP-2000VPN User’s Manual 13
Configure or use any of the following:
•
Configuration File backup and restore.
•
Network Diagnostic
•
PC Database
•
Remote Administration
•
Routing
•
Upgrade Firmware
•
UPnP
Chapter 10:
Other Features and
Settings
Configuration Program
The IP-2000VPN contains an HTTP server. This enables you to connect to it, and configure it using your Web
Browser.
Your Browser must support JavaScript
. The configuration program has been tested on the
following browsers:
•
Netscape v4.08 or later
•
Internet Explorer v4 or later
Preparation
Before attempting to configure the IP-2000VPN, please ensure that:
•
Your PC can establish a physical connection to the IP-2000VPN. The PC and the IP-2000VPN must
be directly connected (using the switch ports on the IP-2000VPN) or on the same LAN segment.
•
The IP-2000VPN must be installed and powered ON.
•
If the IP-2000VPN’s default IP Address (192.168.1.1) is already used by another device, the other
device must be turned OFF until the IP-2000VPN is allocated a new IP Address during configuration.
Using UPnP
If your Windows system supports UPnP, an icon for the IP-2000VPN will appear in the system tray, notifying
you that a new network device has been found, and offering to create a new desktop shortcut to the
newly-discovered device.
•
Unless you intend to change the IP Address of the IP-2000VPN, you can accept the desktop
shortcut.
•
Whether you accept the desktop shortcut or not, you can always find UPnP devices in
My Network
Places
(previously called
Network Neighborhood
).
•
Double - click the icon for the IP-2000VPN (either on the Desktop, or in
My Network Places
) to start
the configuration. Refer to the following section
錯誤
!
找不到參照來源。
for details of the initial
configuration process.