Chapter 5. Web Interface Configuration
Air Live IAS-2000 User’s Manual V1.0
.
76
y
802.1X Authentication:
Enable this function and the hyperlink of
Radius Client List
will appear. Click the
hyperlink to get into the Radius Client Configuration list for further configuration. Please refer to
Radius
Roaming Out/802.1x Authentication
in
5.3.1.1 Authentication Method – Local User
.
y
Trans Full Name:
When enabled, the ID and postfix will be transferred to the RADIUS server for authentication.
When disabled, only the ID will be transferred to RADIUS server for authentication.
y
Server IP:
Enter the IP address/domain name of the RADIUS server.
y
Authentication Port:
Enter the authentication port of the RADIUS server and the default value is 1812.
y
Accounting Port:
Enter the accounting port of the RADIUS server and the default value is 1813.
y
Secret Key:
Enter the key for encryption and decryption.
y
Accounting Service:
Select this to enable or disable the
“Accounting Service”
for accounting capabilities.
y
Authentication Protocol:
There are two methods, CHAP and PAP for selection.
Notice:
If Radius Server does not assign idle-timeout value, IAS-2000 will use the local idle-timeout instead.
