AirLive IAS 2000 Скачать руководство пользователя страница 77

Страница: 77 / 128

Chapter 5. Web Interface Configuration

Air Live IAS-2000 User’s Manual V1.0

.5.3.1.2 POP3

Server

POP3, RADIUS, LDAP and NT Domain Server can change the authentication method. Choose

“POP3”

in the

Authentication Method

field, the hyperlink beside the pull-down menu will become

“POP3 Setting”

Server Name:

Set a name for the server using numbers (0 to 9), alphabets (a to z or A to Z), dash (-),

underline (_) and dot (.) with a maximum of 40 characters, all other letters are not allowed.

Sever Status:

The status shows that the server is enabled or disabled.

Postfix:

Set a postfix that is easy to distinguish (e.g. Local) for the server using numbers (0 to 9), alphabets (a

to z or A to Z), dash (-), underline (_) and dot (.) with a maximum of 40 characters, all other letters are not

allowed.

Warning:

The Policy Name cannot contain these words: MAC and IP.

Black List:

There are five sets of the black lists. You can select one of them or choose

“None”

. Please refer to

5.3.3 Black List Configuration

Authentication Method:

There are four authentication methods,

POP3

RADUUS

LDAP

and

NT Domain

configure from. Select the desired method and then click the link besides the pull-down menu for more

advanced configuration.

Policy Name:

There are four policies to choose from to apply to this particular server.

Click the hyperlink for further configuration. Enter the related information for the primary server and/or the secondary

server (the secondary server is not required). The blanks with red star are necessary information. These settings will

become effective immediately after clicking the

Apply

button.

Содержание IAS 2000

































































































































Результаты поиска

Содержание IAS 2000

Отзывы:

Похожие инструкции для IAS 2000

Бренды по названию

Популярные бренды

AirLive IAS 2000, Руководство пользователя

Результаты поиска

Содержание IAS 2000

Отзывы:

Похожие инструкции для IAS 2000

Бренды по названию

Популярные бренды