23
3.2.5 Operation Mode
Select which mode you would like to run in:
Router Mode:
Router mode will allow the AR686WV2 to act as a normal router with
its own DHCP server and IP Address.
Bridge Mode:
Turn the AR686WV2 into a bridge by selecting
Bridge Mode
and
pressing
Save.
NOTE:
If would like to return the AR686WV2 from Bridge Mode to Router Mode, you will
need to perform a factory reset by holding the reset button for 10 seconds with the power
attached.
3.3 Wireless
Here you can configure the Networking properties of the router.
