Airlift Doors XRS Elite, Руководство по установке

Страница: 3 / 19

****CAUTION****
Please read through these instructions before beginning
installation of the door. Only trained professional door
installers should attempt installation of the XRS series doors
from Airlift Doors, Inc.
Some steps in this process require lifting up to 200 lbs and we
strongly recommend using a mechanical lift or 3 people with
proper lifting and safety equipment.
Always inspect your tools and equipment such as ladders and
be sure all are in proper working operation before beginning
the installation.
Only a licensed electrician should make the necessary
connections to the controls & motor and you should never attempt to
service the motor without first disconnecting the power supply
to the motor. Performing service on this motor without
disconnecting the power supply may result in serious injury or
death.
All components of this door have been engineered according to
measurements provided to Airlift Doors, Inc. Do not attempt
to modify any components or use any substitute parts without
first consulting a factory representative of Airlift Doors, Inc.
Failure to do so may alter the operation of the door and may
create dangerous scenarios upon installation or normal
operation that could result in personal injury or death. Any
modifications to the product without factory approval will void
all factory warranties.
For all XRS Plus models, both Premium and Elite, 120v power
will need to be run to the control box. Furthermore, wiring
capable of supporting 3phase/230v power will need to be run
from the control box to the door opener.