Airlift Doors XRS Elite, Руководство по установке

Страница: 11 / 19

STEP 17 - OPENER INSTALLATION
17-1: Unpack the opener and lay it flat on the ground.
17-2: Determine which side of the opener to attach the mounting brackets. **NOTE** When the opener
is mounted, the black electronics cover will be facing away from the wall. (FIG’s. 17A & 17B)
17-3: Attach the opener brackets to the correct side of the opener using (4) M8 x 1/2” bolts.
**NOTE** The opener brackets mount to the opener through the smaller round holes, NOT the
larger slotted holes.
17-4: Slide the opener onto the end of the shaft making sure the brackets are towards the bearing
plate and the black opener cover is facing away from the wall. (FIG. 17C)
**OPTIONAL** Apply Anti-Seize to the door shaft before installing the motor. (Not supplied)
17-5: Align the slotted holes in the mounting brackets with the bolts on the bearing plate. Slide the
opener onto the bolts. Fasten the mounting brackets to the bearing plate using 3/8” lock washers
and 3/8” nuts. (FIG. 17D)
FIG. 17A (Right Hand Motor Mount) FIG. 17B (Left Hand Motor Mount
FIG. 17C
FIG. 17D