10
11
Leave prime valve OPEN until you are ready to
spray again.
4. Re-engage gun
safety latch
PRESSURE RELIEF PROCEDURE
To avoid possible serious bodily injury, including injection, always follow this procedure whenever the
sprayer is shut off, when checking or servicing it, when installing or changing the tips, whenever you stop
spraying or when you are instructed to relieve the pressure.
1. Engage gun safety latch. Refer to
separate instruction manual provided
with your gun on its safety features
and how to engage safety latch.
5. Turn Prime/Pressure Relief Valve
as shown open (priming) to
relieve fluid pressure.
IF THE SPRAY TIP OR HOSE IS CLOGGED, follow Step 1 through 5 above. Expect paint splashing into the
bucket while relieving pressure during Step 5. If you suspect that pressure hasn't been relieved due to
damaged prime/pressure relief valve or other reason, engage gun safety latch and take your sprayer to an
authorized Airlessco Service Center for service.
2. Turn engine off.
3. Disengage safety latch &
trigger gun to relieve residual
fluid pressure. Hold metal part of the gun in contact
with grounded metal pail.
Pressure Relief Procedure
Open
(Priming &
Pressure Relief)
