14
15
Packing Tightening Procedure:
Inspect the packing nut daily!
If seepage of paint into the packing nut and/
or movement of the piston upward is found
(while not spraying), the packing nut should be
tightened enough to stop leakage only, but not
any tighter.
Overtightening Will Damage the Packings
and reduce the packing life to the life of other
piston pumps.
1. Always stop the pump at the bottom of its stroke when you take
a break or at the end of the day. This helps keep material from
drying on the rod, damaging the packings.
2. Keep the displacement pump packing nut/wet cup 1/3 full of
Airlessco Throat Seal Oil at all times. The TSO helps protect the
packings and rod.
3. Lubricate Connecting Rod Pin every 3 months.
4.
Inspect the packing nut daily.
Your paint pump has
Airlessco's patented "Triple Life Packing System".
Packing life will be extended a minimum of
3 times if the proper packing tightening
procedure is followed!
FIG. 12
Bleed
(Weep Hole)
1 oz. SAE 30 W oil
every 3 months.
Oil impregnated
sleeve. Dip in hot 10 W
oil when removed.
Sealed Bearing
Fill Plug - Note: Gearbox has
permanent gear grease and
will not require changing.
OIL AND LUBRICATION PROCEDURE
REGULAR MAINTENANCE
