WING FAIRINGS
Cut out the objects in
WING FAIRINGS
(or
“WF”
) section
objects.
Fold each of the
Wing
Fairings
. For each
Wing Fairing
object,
fold down along the
middle line first
(W)
.
Then, make inverse
folds up along the two
parallel fold lines
(V)
.
Apply glue to the non
-printed side of the
Wing Fairings
. Apply
glue only to the
(Y)
zones demonstrated
above. Do not glue
outside these zones.
On the printed side,
apply pressure to the
two sides of the
object to ensure the
glue adheres.
Once completed, set
the objects aside until
they are needed at a
later stage.
1
Paper-based scale model design system Copyright © 2001-2019
—
James Messner / Papier Avion and Airigami
4