NOSE LANDING GEAR
Cut out the objects
NOSE GEAR
(or
“NG”
) section.
Fold the
Nose Landing
Gear
. Fold along the
(A)
lines.
Curve the
(B)
section so that the two
(B)
strands
are parallel.
Apply glue to the face
of the highlighted
(C)
and
(D)
areas.
Swing section
(C)
inside the ‘box’
structure of section
(D)
. Tuck the two
middle
(B)
strands
within the ‘box’ of
section
(D)
.
Close the ‘box’ of
section
(D)
by
adhering section
(D)
on top of area
(C)
.
Fold the along the
(E)
lines to push the
(F)
tabs down so that
they are at a 90
degree angle to the
structure.
Once completed, set
the objects aside until
they are needed at a
later stage.
6
Paper-based scale model design system Copyright © 2001-2019
—
James Messner / Papier Avion and Airigami
12