AIRFLO PSV-8L, Руководство оператора и каталог запасных частей

Страница: 6 / 17

OPERATORS MANUAL – PSV-8L (ELECTRIC) AIR FLO MANUFACTURING., CO INC.
5 | P a g e
Things to Know after Mounting the
Spreader
A. The tie-down straps are provided for
the purpose of securing the
spreader to the vehicle only and are
not to be used for any other
purpose. It is imperative that the
spreader be tied to the vehicle at all
times.
B. Be sure to verify with vehicles
manufacturer that the factory
installed anchor points are designed
for this application.
C. Periodically check to see if the
spreader mounting hardware is
securely tightened.
Mounting the Spinner/Chute
Assembly
1. Attach the Spinner/Chute Assembly
to the spreader inserting the lock
pins, shown in Figure 8, into the two
holes located at the end of the rails
of the spreader as shown in Figure 9.
2. Install the roller chain between the
sprocket mounted to the
Spinner/Chute Assembly and the
Motor Sprocket. Make sure both
sprockets are in-line with one
another. Tighten the gearbox
sprocket set screw. Install the roller
chain master link. See Figure 10.
Figure 8.
Figure 9.
Figure 10.