background image

071009

TO AVOID RISK OF ELECTRIC SHOCK, BE SURE TO SHUT OFF POWER AT THE MAIN

FUSE OR CIRCUIT BREAKER BOX BEFORE INSTALLING OR SERVICING THIS 

FIXTURE. TURNING OFF THE ELECTRICAL POWER BY USING THE LIGHT SWITCH 

IS NOT SUFFICIENT TO PREVENT ELECTRICAL SHOCK.

TO REDUCE THE RISK OF INJURY, INSTALL THE FAN SO THAT THE BLADES ARE 

AT LEAST 7 FEET (2.1 METERS) ABOVE THE FLOOR AND AT LEAST 18 INCHES

(0.5 METERS) FROM THE TIP OF THE BLADES TO THE WALL. 

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR PERSONAL INJURY, MOUNT

TO AN OUTLET BOX MARKED "ACCEPTABLE FOR FAN SUPPORT" AND USE 

MOUNTING SCREWS PROVIDED WITH THE OUTLET BOX.

THE INSTALLATION MUST BE IN ACCORDANCE WITH THE NATIONAL ELECTRICAL

CODE, ANSI/NFPA 70-1999 AND LOCAL CODES. IF YOU ARE UNFAMILIAR WITH

INSTALLING OR SERVICING ELECTRICAL WIRING, SEEK THE SERVICES OF A 

QUALIFIED LICENSED ELECTRICIAN.

SUITABLE FOR USE WITH SOLID STATE SPEED CONTROLS.

All screws on the fan must be checked and re-tightened where necessary before installation.

To reduce the risk of personal injury, do not bend the blade brackets when installing the brackets, 

balancing the blades or cleaning fan. Do not insert foreign objects in between rotating fan blades.

Before changing the fan direction, turn off the fan and wait for the fan blades to stop completely.

If a stationary appliance is not provided with a supply cord and a plug, or with other means for 

disconnection from the main supply having a contact separation of at least 3 mm in all poles, then the

means for disconnection must be incorporated in the fixed wiring in accordance with the wiring rules.

NOTE: The safeguards provided by these safety instructions and by any separate installation 

instructions are not meant to cover all possible conditions and situations that may occur. It must be 

understood that common sense, caution and care are factors which can not be built into this product. 

These factors must be supplied by the person(s) installing, caring for and operating the fan.

Safety Instructions

READ ALL SAFETY INFORMATION AND INSTALLATION INSTRUCTIONS BEFORE YOU BEGIN 

INSTALLING THE FAN. SAVE INSTRUCTIONS.

WARNING

Содержание FN52241









Отзывы: