background image

page 1

PREFACE

Thank you for purchasing the AireGard Fresh Air Supply Ventilator, FS-150! We hope that the product that you 

purchased from us will be delighting you always. Before you start using the product, we remind you to carefully 

read through this user manual to understand more about this product in order to avoid from any harm or risk of 

danger that could lead to unnessary damage or even personal injury.

PRODUCT SPECIFICATION

MODEL                                                                        SPEED     POWER   AIR FLOW   STATIC PRESSURE 

          WEIGHT

                                                                                                                   [ W ]           [m

3

/h ]                       [ Pa ]                                                  [ kg ]

RATED

VOLTAGE

[ V ]

FS-150

240 

        50

RATED

FREQUENCY

[ Hz ]

HIGH

MID

LOW

68

54

50

250

170

135

185

160

135

OPERATION MODES

WATER
PROOF

LEVEL

IPX2           9.5

NOTE :

1. The units of Air Flow, Voltage and other variances are measured under the condition of zero Static Pressure.

2. The measurement of Air Flow are obtained under the strictest monitoring within our research facility. The 

readings may varies within a difference range of    10%

DIMENSION & SPARE PARTS

NO.

NAME

QUANTITY

WIND DUCT   CIRCUIT    HANGER    METAL    HIGH EFFICIENCY    ACTIVATED CARBON   WIND   INSPECTION

   COMBO        PANEL 

           FILTER       COMBO FILTER 

           FILTER             TRAP        DOOR

Содержание FS-150













Отзывы: