AIREDALE R410A, Техническое руководство

Страница: 4 / 86

Health and Safety
IMPORTANT
The information contained in this manual is critical to the correct operation and maintenance of the unit and should be
read by all persons responsible for the installation, commissioning and maintenance of the Airedale unit.
Safety
The equipment has been designed and manufactured to meet international safety standards but, like any mechanical/
electrical equipment, care must be taken if you are to obtain the best results.
CAUTION
1. Installation, service and maintenance of Airedale equipment should only be carried out by technically trained
competent personnel.
2. When working with any air conditioning units, ensure that the electrical isolator is switched off prior to servicing or
repair work and that there is no power to any part of the equipment.
3.
$OVRHQVXUHWKDWWKHUHDUHQRRWKHUSRZHUIHHGVWRWKHXQLWVXFKDV¿UHDODUPFLUFXLWV%06FLUFXLWVHWF
4. Electrical installation commissioning and maintenance work on this equipment should be undertaken by competent
and trained personnel in accordance with local relevant standards and codes of practice.
5.
7KHUHIULJHUDQWXVHGLQWKLVUDQJHRISURGXFWVLVFODVVL¿HGXQGHUWKH&26++UHJXODWLRQVDVDQLUULWDQWZLWKVHW
:RUNSODFH([SRVXUH/HYHOV:(/IRUFRQVLGHUDWLRQLIWKLVSODQWLVLQVWDOOHGLQFRQ¿QHGRUSRRUO\YHQWLODWHGDUHDV
6. A full hazard data sheet in accordance with COSHH regulations is available should this be required.
Personal protective equipment
Airedale recommends that personal protective equipment is used whilst installing, maintaining and commissioning
equipment.
Refrigerant Warning
The Airedale SmartCool uses R410A refrigerant which is a high pressure refrigerant. It requires careful attention to
proper storage and handling procedures.
Use only manifold gauge sets designed for use with R410A refrigerant. Use only refrigerant recovery units and cylinders
designed for high pressure refrigerants.
R410A must only be charged in the liquid state.
The refrigerant must be stored in a clean, dry area away from sunlight and never be stored above 50°C.
Manual Handling
Some operations when servicing or maintaining the unit may require additional assistance with regard to manual
handling. This requirement is down to the discretion of the engineer. Remember, do not perform a lift that exceeds your
ability.
Environmental Policy
It is our policy to:
‡
Take a proactive approach to resolve environmental issues and ensure compliance with regulatory requirements.
‡
Train personnel in sound environmental practices.
‡
Pursue opportunities to conserve resources, prevent pollution and eliminate waste.
‡
Manufacture products in a responsible manner with minimum impact on the environment.
‡
Reduce our use of chemicals and minimise their release to the environment.
‡
Measure, control and verify environmental performance through internal and external audits.
‡
Continually improve our environmental performance.
SmartCool™ 16 - 60 Precision Air Conditioning
4
Introduction
SmartCool Technical Manual 7525371 V1.2.0_03_2013