Intended use
AIRBOY | Version 1.07
7
2.7 Safety marking on the compressor
The following safety symbols are attached to the com-
pressor:
Fig. 1: Safety symbols on the compressor
Damaged or missing safety symbols on the compressor
may lead to errors and material damages. The safety
symbols applied to the compressor must not be re-
moved.
Please observe the following points:
The instructions of the safety symbols at the compressor
must be observed under all circumstances. Attach new
labels immediately if the safety symbols fade out or be-
come damaged during the lifetime of the compressor.
Damaged safety symbols must be replaced immedi-
ately.
The compressor must be put out of operation from the mo-
ment when the labels are unable to be recognized and un-
derstood at first glance, until new labels are attached.
2.8 Safety devices
Safety valve
The safety valve is locatedat the top of the housing (AIR-
BOY 186 OF E) or on the fitting (AIRBOY 206 OF E).
When the safety value is reached, the safety valve
opens and lets off air. After triggering the safety valve,
the operator must turn off the compressor and request
control by the maintenance personnel.
Motor protection
The compressor is equipped with a motor protection that
automatically shuts off the compressor when overloaded.
After a sufficient cooling phase, the compressor can be
restarted.
3
Intended use
The compressor serves for the operation of pneumatic
tools and pneumatic control systems and installations
provided for this purpose. It was developed to aspire
clean, dust-free and unloaded ambient air, and to com-
press it. The ambient air must not be loaded with ag-
gressive or combustible additions. The compressor may
only be operated in closed rooms with sufficient ventila-
tion. It is protected against overheating with a motor pro-
tection switch. The motor protection switch triggers au-
tomatically when the safety limit values are reached.
However we recommend not to load the compressor
above 50% of its capacity, and not to have it run in con-
tinuous operation for more than 15 minutes.
Furthermore, many accessories can be connected to
the compressor beyond pneumatic tools, which can be
used for blowing, washing and spray-painting. We
kindly ask you to consult the corresponding operating
manuals in order to ensure the correct usage of these
accessories.
The compressor must not be used in the food and
health area, e. g. for filling breathing gas cylinders.
the compressor and the connected pneumatic tools
may only be operated by an instructed person. Children
and adolescents must not operate the compressor and
connected pneumatic tools.
The proper use also includes observing all indications in
these operating instructions. Any use beyond the proper
use or any other use is regarded as misuse.
Bei dem Kompressor handelt es sich um durch einen
The compressor is a piston compressors driven by an
electric motor and connected to a compressed air stor-
age tank; it is intended to be sold and operated in the
EU region as well as in the geographical region of Eu-
rope.
3.1 Foreseeable misuse
If the intended use is observed, any reasonably foresee-
able misuse which could lead to hazardous situations
with personal damage is impossible with the Compressor.
DANGER!
The piston compressor, as produced in series, is not
explosion-protected and must not be used in areas
with explosion hazards!
WARNING!
Danger in case of misuse!
A misuse of the compressor can result in dangerous
situations.
- Only operate the compressor in the power range
given in the technical specifications.
- Never bypass or override the safety devices.
- Only operate the compressor in a technically flaw-
less status.
NOTE !
If the compressors are not used as intended, or if the
safety directives or operating instructions are ignored,
or if the compressors are modified without authorisa-
tion, the liability of the manufacturer for any damages to
persons or objects resulting here of is excluded and
the claim under guarantee is becoming null and void!!
Содержание 2001230
Страница 18: ...www aircraft at...
