Aircatglobal VirtualFly SOLO-A, Руководство пользователя

Страница: 9 / 24

9
3. START UP THE SOLO-A - SOLO-A USER'S MANUAL
• Once the connection is established, you should see an image like the
second.
• At the top “This Computer” indicates if the software MFS/P3d is detec-
ted. Only "Connected" will appear when you have initiated MFS/P3d.
• Bellow “Client Connection Status” indicates the connection with the
SOLO-A.
From this moment, we can already appreciate if the SOLO-A and the
MFS/P3D computer are communicating. In the SOLO-A annunciator you
will see one of the following (make sure you have the BAT Switch OFF):
• Connected Everything is ready, you can already begin to fly.
• Searching There is a communication failure between the MFS/
P3D and the SOLO-A, look at Chapter 8 "Troubleshooting".
If you don't get the connection after reviewing Chapter 8, please contact
the VirtualFly Technical support: "www.virtual-fly.com/en/contact".
DEACTIVATING THE SOLO-A
1. Press the push-button (F) to stop the "Windows" from the SOLO-A
computer, wait for Windows to stop totally.
2. Once "Windows" has stopped, switch the power switch to OFF-0.
In this case the
communication
module is
searching
the MFS/P3d
and the SOLO-A
In this case, the MFS/P3Dand SOLO-A are connected
In this case, the MFS/P3Dand SOLO-A are not connected
In this case the
communication
module is
connected
to MFS/P3d
and the SOLO-A
Connected
F
2