Aircalo ACGC 20, Техническое уведомление и инструкции по монтажу

Страница: 8 / 24

8
2-3 Performance of ACGC centrifugal gas unit heaters
Centrifugal model. ACGC
ACGC unit heaters are equipped with a centrifugal fan
and are supplied as standard with an air case
(assembly p. 9).
They are intended for blowing or taking air from a
sheath network.
Mixture dampers and a filter can be incorporated on
the air case.
TYPES ACG20C ACG28C ACG35C ACG45C ACG55C ACG75C
Calorific output kW
21 28 35 45 55 71
Useable power kW
19.5 25.5 31.5 40.5 50 64.4
Efficiency %
> 91 > 91 > 91 > 91 > 91 > 91
Type of fan
BD25/25 M6 BD28/28 M6 BD28/28 M6 BD33/33 M6 BD33/33 M6 BD33/33 M6
Air flow at 15 °C
Air flow at 50 °C
m
3
/h
1 700
1 900
2 050
2 300
2 800
3 150
3 900
4 350
4 400
4 950
5 400
6 050
Delta T° of air °C
33.7 36.6 33.1 30.5 33.4 35.1
Pressure of available Pa
120 90 135 110 135 130
Gas flow at 15°C
Natural G20
Groningue G25
Propane G31
20 mbar
25 mbar
37 mbar
2.22 m
3
/ h
2.46 m
3
/ h
1.64 kg / h
2.96 m
3
/ h
3.29 m
3
/ h
2.18 kg / h
3.70 m
3
/ h
4.11 m
3
/ h
2.73 kg / h
4.76 m
3
/ h
5.28 m
3
/ h
3.51 kg / h
5.82 m
3
/ h
6.43 m
3
/ h
4.30 kg / h
7.40 m
3
/ h
8.22 m
3
/ h
5.46 kg / h
Smoke diameter mm
80 / 125 80 / 125 80 / 125
100 130 130
Air input diameter mm
100 130 130
Supply voltage
Electrical power
VA
860 900 920 1250 1350 1700
Weight kg
99 117 125 140 165 180
Mono-phase 230 Volts / 50 Hz - IP42
Motor electrical power kW - Hp
0.25 - 1/3 0.37 - 1/2 0.37 - 1/2 0.75 - 1 0.75 - 1 1.1 - 1.5
Motor rotation speed Rpm
720 680 850 750 860 980
Motor coupling Speed
— MV GV PV MV —
Flow/pressure curve N°
2 4 5 8 9 10
ACG95C
92
84
> 91
BD33/33 M6
2×(0.75-1)
750
PV
-
7 600
8 500
29.1
130
10.00 m
3
/ h
11.1 m
3
/ h
7.4 kg / h
130
130
2 400
260
Preparation for assembly :
Disassemble the side panels (1) and (2) of
the fan case
Assembly of A and B :
Assemble the fan case A on the thermal
case B, using the 4 BTR M8 (3) screws
provided.
Caution : Position the fan supply electrical
connector (5) at the supply cable end (7),
See photo (I) above.
Electrical connection :
Connect the fan connector (5) with the
thermal module connector (6), see photo (II)
above.
Reinstall the side panels (1) and (2) using
the hardware supplied.
A – Fan case
B – Thermal case
A
1
2
B
3
Assembly of the fan case for ACGC
6
5
7
I
II